Thursday, 11 August, 2022
HomePageTurnerBook ExcerptsIndian innovation begins in small towns and IITs. Covid ventilators were no...

Indian innovation begins in small towns and IITs. Covid ventilators were no different

In ‘The Ventilator Project’, Srikant Sastri and Amitabha Bandyopadhyay write about how IIT-K’s Nocca Robotics built an ICU ventilator to save Covid patients.

Text Size:

When the Prime Minister of India announced a Covid-19 Solution Challenge on 16 March, nearly 500 kilometres away in Kanpur, Professor Amitabha Bandyopadhyay sent out news of the challenge as an SOS to all IIT Kanpur-incubated startups, hoping a few would have the products or services necessary to fight the pandemic. Several came forth with solutions ranging from hand sanitizers, PPEs, N95 face masks, diagnostic kits and portable respirators.

Then came the pitch for a ventilator by a robotics venture named Nocca Robotics. There was a simplicity and elegance to the proposal for building a high-quality life-saving device that immediately caught Amitabha’s attention. Until then, Nocca Robotics had been in the business of making robots to clean solar panels without using water.

Nocca Robotics was the brainchild of Nikhil Kurele and Harshit Rathore, both 2016 graduates of IIT Kanpur (IIT-K). Nikhil had grown up in Shahdol, a small town in Madhya Pradesh, and was a ‘badmaash’ at school. Academics was not a priority for him. Although he fell in love with maths in class eight, he remained terrible at other subjects. In the class ten board exams, when he got 96% in maths but only 71% overall, Nikhil’s parents packed him off to Kota for his final two school years so he wouldn’t be able to keep up his ‘errant’ ways. It was in Kota that he prepared for his IIT entrance exam.

Soon Nikhil was in IIT-K, where he developed an interest in robotics and became the secretary of the Robotics Club. A summer internship at the Frugal Innovation in Design and Technology Centre at IIT-K, followed by a second one as a design engineer at Tata Technologies, honed his interest in design. A ten-month stint at Bajaj Auto after graduating from IIT-K gave him the exposure to automation in assembly and machining processes. And with these pieces in place, the path to creating Nocca Robotics had been paved, especially once he met Harshit Rathore.

Although Harshit, a local from Kanpur, was a chemistry student at IIT-K, his heart was in motorsport. He was the technical lead for the Baja SAE All-Terrain Vehicle project on campus. A summer internship at Tata Motors and ten months in fabricated metal products manufacturing completed his transition from chemistry to robotics. Harshit and Nikhil shared a love for SAE motorsport and racing at 140–150 kmph on the IIT Kanpur airstrip was one of the ways in which they bonded. They would import components to build cars, using the money sent by their parents meant for tuition fees and wait for the club to reimburse it. Besides a love for motorsport, the duo also shares the same date of birth (though, as is common in India, Nikhil’s official date of birth is different).


Also read: This mask could protect against Covid 25 times longer than cloth masks, researchers say


Nocca Robotics finally lifted off in April 2017 at the Startup Incubation and Innovation Centre (SIIC), IIT-K’s incubation centre. Despite the usual startup hiccups of product development, initial customer adoption, cash flows and mentoring, they obtained seed funding from SIIC and Villgro and mentoring from several IIT-K alumni. Their big break came with initial orders from Adani Power and Mahindra Susten, and early conversations with Renew, Tata Voltas and Azure Power. This provided them with confidence which was bolstered by a series of funds raised from the Indian Angel Network (IAN) Fund in June 2019. With orders in hand, and now money in the bank too, Nocca Robotics was all set to build their business.

But on 21 March, the call from Amitabha changed the startup’s course completely.

Nikhil had first responded to the call by offering to only assemble ventilators, then made a pitch to design a new one. By that time, India had recorded only 471 cases and 8 deaths, but the government had already begun preparing the country for social distancing by implementing a voluntary ‘janata curfew’ from 7 a.m. to 9 p.m. on the previous day. By 24 March, Amitabha was convinced, along with the IIT-K Director Professor Abhay Karandikar, that the campus incubator would need to work with Nocca to build a new ventilator from scratch.

Dr Prachi Sathe of Ruby Hall Clinic, Pune with Noccarc V310

The very same day, Amitabha brainstormed with a small group of Mechanical Engineering professors (Sameer Khandekar, Arun Saha and J Ramkumar) and Dr Deepak Padmanabhan, a cardiologist from Bangalore who is one of the clinical mentors of the incubator. Various ventilator designs were deliberated upon including an Ambu-bag-based design. Ambu-bags are handheld devices used to help patients breathe especially in out-of-hospital situations. However, Dr Padmanabhan was very clear that only a full-fledged ICU ventilator would serve the purpose of saving Covid-19 patients. This was clearly a daunting challenge considering that Nikhil and Harshit had never seen a functioning ICU ventilator, let alone designed one.

However, they decided to take up the challenge.

There were many factors behind their decision, the first of which was of course, purely emotional – they wanted to serve the nation in its hour of crisis. IIT training develops in students not just the confidence to tackle any challenge but also an affinity towards being challenged. The crazier it is, the more they love it. There were two practical considerations as well. They realized that working on the ventilator project would allow them to operate their factory during the lockdown. And since such an important project was very likely to be generously funded, they would be able to hold onto their engineering team at Nocca Robotics. With this belief, they gave their hundred percent commitment to the project.


Also read: The year ventilation, refrigeration & ultracold freezers were hot in demand


On 25 March, the director of IIT Kanpur, and a huge champion of the project, Professor Abhay Karandikar, posted on all his social media handles about this ambitious project. This gave the project much needed visibility, which brought in offers of collaboration and help kept pouring in. On 26 March, Amitabha received an email from Professor Ashutosh Sharma, Secretary at the Department of Science of Technology, Government of India, who is also an alumnus of IIT-K and a member of its faculty on lien to Government of India. Professor Sharma introduced Amitabha to a global team of volunteers – The Bridge Ventilator Consortium – who were helping teams from different countries to develop ventilators. One of the members of the team was Dr Govind Rajan, Clinical Professor, Department of Anesthesiology and Perioperative Care at the University of California in Irvine. Amitabha set up a meeting between the Nocca Robotics team and Dr Govind Rajan at 11 p.m. IST on 26 March 2020. Dr Rajan began by explaining how an Ambu-bag-based ventilator works and how to design it quickly. After he finished, the Nocca team politely informed him that their clinical mentor had urged them to only pursue an ICU ventilator and nothing else. Dr Rajan agreed with the advice given but was sceptical if this could be pulled off given all the constraints and the high-level precision needed. Like a magician pulling a rabbit out of a hat, Nikhil suddenly showed everyone a prototype of an ICU ventilator, and even Amitabha was stunned.

Nikhil and Harshit explained quite nonchalantly how they had got this done in the last three days by working almost non-stop. Two other IIT-K alumni were stuck in Nikhil and Harshit’s Pune apartment during the sudden lockdown in Maharashtra – their batchmate Abhishek Kulkarni and their junior Tushar Agarwal. Soon after the 24 March meeting with the director, the four of them had divided up work among themselves to read about different aspects of the ventilator.

By the evening of 25 March, they had the prototype working.

This excerpt from ‘The Ventilator Project: How the IIT Kanpur Consortium Built a World-class Product during India’s Covid-19 Lockdown’ by Srikant Sastri and Amitabha Bandyopadhyay has been published with permission from Pan Macmillan India.

Subscribe to our channels on YouTube & Telegram

Support Our Journalism

India needs fair, non-hyphenated and questioning journalism, packed with on-ground reporting. ThePrint – with exceptional reporters, columnists and editors – is doing just that.

Sustaining this needs support from wonderful readers like you.

Whether you live in India or overseas, you can take a paid subscription by clicking here.

Support Our Journalism

Most Popular

×